wastewater dn25 4-20ma output seawater portable ultrasonic flowmeter

Series DF6100-EP Doppler Portable Ultrasonic Flow Meter is designed to measure volumetric flow of within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.

 

The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, OCT outputs.

Products Details

Series DF6100-EP Doppler Portable Ultrasonic Flow Meter is designed to measure volumetric flow of within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid. The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, OCT outputs. Doppler wastewater flow measurement instruments are mainly applied to urban sewage treatment plant, drainage pump station environmental protection detection and mining, oil field,metallurgy, chemical industry, oil refining, paper making, food and other industries of urban drainage, industrial wastewater,sewage, mud, pulp, oil and water mixed liquid flow measurement.Suitable for steel, hard plastic pipe and other hard pipe, it can be a variety of pipe diameter and wall thickness containing suspended solid particles or bubble liquid measurement. Portable type ultrasonic flow meter could be applied to Raw sewage,activated sludge,ground water,pulp and paper slurries,chemical slurries,drainage and mining recirculation.It is suitable for pipe sizes ranging from 40 to 4000mmFor dirty liquids, a certain amount of air bubbles or suspended solids shall be containedExcellent low flow rate measurement ability, low to 0.05m/sA wide range of flow measurement, high flow rate can reach 12m/sHigh-temperature transducer is suitable to liquids of -35℃ ~ 200℃Do not need to shut down the pipe flow when installing the transducers

Features

Configuration Code

DescriptionFeaturesSpecificaitonsConfiguration CodeUser-friendly configuration4-20mA, OCT outputsAccuracy: 2.0% Calibrated spanRechargeable battery can work up to 50 hours

Specificaitons

Transmitter:
Measurement principle Doppler ultrasonic
Resolution 0.25mm/s
Repeatability 0.5% of reading
Accuracy 0.5% -- 2.0% F.S.
Response time 2-60s for optional
Flow Velocity Range 0.05- 12 m/s
Liquid Types Supported Liquids containing 100ppm of reflectors and at least 20% of the reflectors are larger than 100 micron.
Power Supply AC: 85-265V Up to 50 hours with fully charged internal batteries
Enclosure type Portable
Degree of protection IP65 according to EN60529
Operating temperature -20℃ to +60℃
Housing material ABS
Measurement Channels 1
Display 2 line × 8 characters LCD, 8-digit rate or 8-digit total (resettable)
Units User Configured (English and Metric)
Rate Rate and Velocity Display
Totalized gallons, ft³, barrels, lbs, liters, m³,kg
Communication 4-20mA OCT output
keypad 6pcs buttons
Size Transmitter:270X125X175mm
Weight 3kg
Transducer:
Transducers Type Clamp-on
Degree of protection IP65. IP67 or IP68 according to EN60529
Suited Liquid Temperature Std. Temp.: -35℃~85℃ for short periods up to 120℃
High Temp.: -35℃~200℃ for short periods up to 250℃
Pipe diameter range 40-4000 mm
Transducer Size 60(h)*34(w)*32(d)mm 
Material of transducer Aluminum  (standard temperature). sensor, Peek (high temperature)
Cable Length Std: 5m 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours