high quality 4-20ma mechanical water flow meter for domestic wastewater

DF6100-EC Wall-mounted Doppler Ultrasonic Flow Meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.

The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays,OCT outputs.

Products Details

DF6100-EC Wall-mounted Doppler Ultrasonic Flow Meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid. The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays, OCT outputs. Clamp on wastewater measuring doppler flow meter also named waste water flow transducer monitor /sewage flow measurement instruments could be applied to raw sewage water,waste water,domestic wastewater,sanitary sewage,activated sludge,ground water,pulp,papar slurry,chemical slurry,drainage and mining recirculation and so forth.It is suitable for pipe sizes ranging from 40 to 4000mmFor dirty liquids, a certain amount of air bubbles or suspended solids shall be containedExcellent low flow rate measurement ability, low to 0.05m/sA wide range of flow measurement, high flow rate can reach 12m/sHigh-temperature transducer is suitable to liquids of -35℃ ~ 200℃Do not need to shut down the pipe flow when installing the transducers

Features

Configuration Code

DescriptionFeaturesSpecificaitonsConfiguration CodeUser-friendly configuration4-20mA, Relay and OCT outputsAccuracy: 2.0% Calibrated span

Specificaitons

Transmitter:
Measurement principle Doppler ultrasonic
Resolution 0.25mm/s
Repeatability 0.2% of reading
Accuracy 0.5% -- 2.0% F.S.
Response time 2-60s for optional
Flow Velocity Range 0.05- 12 m/s
Liquid Types Supported Liquids containing 100ppm of reflectors and at least 20% of the reflectors are larger than 100 micron.
Power Supply AC: 85-265V   DC: 24V/500mA
Enclosure type Wall-mounted
Degree of protection IP66 according to EN60529
Operating temperature -20℃ to +60℃
Housing material Fiberglass
Measurement Channels 1
Display 2 line × 8 characters LCD, 8-digit rate or 8-digit total (resettable)
Units User Configured (English and Metric)
Rate Rate and Velocity Display
Totalized gallons, ft³, barrels, lbs, liters, m³,kg
Communication 4-20mA,Relay and OCT output
keypad 4pcs buttons
Size 244(h)*196(w)*114(d)mm
Weight 2.4kg
Transducer:

Transducers Type

Clamp-on

Degree of protection

IP65. IP67 or IP68 according to EN60529

Suited Liquid Temperature

Std. Temp.: -35℃~85℃ for short periods up to 120℃

High Temp.: -35℃~200℃ for short periods up to 250℃

Pipe diameter range

40-4000 mm

Transducer Size

60(h)*34(w)*32(d)mm

Material of transducer

Aluminum for standard temp.sensor and peek for high temp.sensor

Cable Length

Std: 10m 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours