clamp on dual path ultrasonic flowmeter

TF1100-DC Dual-channel Wall-mounted Transit Time Ultrasonic Flowmeter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Two pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility. This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.

Products Details

TF1100-DC Dual-channel Wall-mounted Transit Time Ultrasonic Flowmeter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Two pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility. This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.Dual channel non-invasive transducers to ensure high accuracy 0.5% of the flow meter.Easy to install, cost effective, and require no pipe cutting or processing interrupt.Wide liquid temperature range: -35℃~200℃.Data logger function.Aluminum or Stainless steel SUS304 sensors for your optional. Thermal energy measurement capability can be optional.For commonly used pipe materials and diameters from 20mm to 6.0m.Wide bi-directional flow range of 0.01 m/s to 15 m/s.Transmitter:

Measurement principle

Ultrasonic transit-time difference correlation principle

Flow velocity range

0.01 to 15 m/s, bi-directional

Resolution

0.1mm/s

Repeatability

0.15% of reading

Accuracy

±0.5% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s

Response time

0.5s

Sensitivity

0.001m/s

Damping of displayed value

0-99s(selectable by user)

Liquid Types Supported

both clean and somewhat dirty liquids with turbidity <10000 ppm

Power Supply

AC: 85-265V   DC: 24V/500mA

Enclosure type

Wall-mounted

Degree of protection

IP66 according to EN60529

Operating temperature

 -10℃ to +60℃

Housing material

Fiberglass

Display

4.3’’ color LCD 5 lines display, 16 keys

Units

User Configured (English and Metric)

Rate

Rate and Velocity Display

Totalized

gallons, ft³, barrels, lbs, liters, m³,kg

Thermal energy

unit GJ,KWh can be optional

Communication

4~20mA(accuracy 0.1%),OCT, Relay, RS485 (Modbus),data logger

Security

Keypad lockout, system lockout

Size

244*196*114mm

Weight

2.4kg
Transducer:

Degree of protection

Standard IP65; IP67, IP68 can be optional

Suited Liquid Temperature

-35℃~200℃

Pipe diameter range

20-50mm for type B, 40-4000mm for type A

Transducer Size

Type A    46(h)*31(w)*28(d)mm
Type B    40(h)*24(w)*22(d)mm

Material of transducer

Aluminum or Stainless steel SUS304

Cable Length

Std:10m

Temperature Sensor

Pt1000, 0 to 200℃, Clamp-on and Insertion type   Accuracy: ±0.1%

Features

Applications

Specifications

Principle of measurement

DescriptionFeaturesDimensionalSpecificaitonsPrincipleApplications

 Water and waste water industry - hot water, cooling water, potable water, sea water etc.)  Petrochemical industry  Chemical industry -chlorine, alcohol, acids, .thermal oils.etc  Refrigeration and air conditioning systems  Food , beverage and pharmaceutical industry  Power supply- nuclear power plants, thermal & hydropower plants), heat energy boiler feed water.etc  Metallurgy and mining applications  Mechanical engineering and plant engineering-pipeline leak detection, inspection, tracking and collection.

Service and maintenance Replacement of defective devices Support of commissioning process and installation Performance and efficiency measurement - Evaluation and assessments - Capacity measurement of pumps - Monitoring of regulating valvesThe TF1100 ultrasonic flow meter is designed to measure the fluid velocity of liquid within a closed pipe. The transducers are a non-invasive, clamp-on type, which will provide benefits of non-fouling operation and easy installation. The TF1100 transit time flow meter utilizes two transducers that function as both ultrasonic transmitters and receivers. The transducers are clamped on the outside of a closed pipe at a specific distance from each other.  The transducers can be mounted in V-method where the sound transverses the pipe twice, or W-method where the sound transverses the pipe four times, or in Z-method where the transducers are mounted on opposite sides of the pipe and the sound crosses the pipe once.  This selection of the mounting method depends on pipe and liquid characteristics.  The flow meter operates by alternately transmitting and receiving a frequency modulated burst of sound energy between the two transducers and measuring the transit time that it takes for sound to travel between the two transducers. The difference between the transit-time is directly and exactly related to the velocity of the liquid in the pipe, as shown in below Figure.

Dimensional Sketches

Transmitter:Transducer:B   40(h)*24(w)*22(d)mm} A   46(h)*31(w)*28(d)mm

Configuration Code

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours